sputnik-tins.jpg

Matt Paint

Super Quality Matt for Walls and Ceilings

Coverage: approx 12m2/litre per coat on non-porous surfaces. VOC content <0.1g/Litre

Prep - Remove any loose, dusty or flaking material.Ensure the surface is clean and dry (no dirt, oil, grease etc). If new, bare or absorbent surface,(eg plaster or filler) seal with this product, thinned 10% with water. If the wall or ceiling isdamaged, repair using good quality filler – lo-cost fillers can cause flaking with any paint.

Paint - Drying time: approx one hour with light ventilation. Stir well to ensure the paint is completely mixed. Apply 2 coats with a medium pile roller (or brush), leave 2 hours between coats. TIP: drying may take longer in very cold or humid conditions. If the colour change is strong, more coats may be required. Pour out as much paint as needed - do not put the brush or part-used paint back in the tin - it can cause spoilage.

Clean-Up - wash equipment, brushes and rollers in water.

Storage - Store paint in dry conditions away from frost & heat.

Health & Safety - this product is considered to be non-toxic and safe – but do not swallow and keep out of the reach of children.


Eggshell - Multi purpose

Multi-purpose Eggshell - Washable & self-undercoating for walls, ceilings, Kitchens & Bathrooms, Interior woodwork, mdf, painted metal, Interior & Exterior Walls (not floors; see Gloss & Satin)

Coverage: approx 12m2/litre per coat on non-porous surfaces. VOC content <0.1g/Litre

Prep - Remove any loose, dusty or flaking material. Ensure the surface is clean and dry (no dirt, oil, grease etc). If new, bare or absorbent surface, (eg plaster or filler) seal with this product, thinned 10% with water. Repair damage using good quality filler – lo-cost fillers can cause flaking. Previously painted wood or metal surfaces need a light rub-down with sandpaper. Not for uncoated bare hardwoods or lining paper directly – both need priming first. Pour out as much paint as needed - do not put the brush or part-used paint back in the tin - it can cause spoilage.

Paint - Drying time: approx one hour with light ventilation. Stir well to ensure the paint is completely mixed. Apply 2-3 coats with a short pile roller or fibrillated brush, leave 8 hours between coats. TIP: drying may take longer in very cold or humid conditions. If the colour change is very strong, more coats may be required. Do not lay-off. Cleaning – with a wet sponge, do not use harsh, abrasive, alkaline cleaners. Full curing & hardness is achieved in approx 10 days – avoid washing, wetting or abrasion for this time.

Storage - Store paint in dry conditions away from frost & heat.

Health & Safety - this product is considered to be non-toxic and safe – but do not swallow and keep out of the reach of children.


Gloss Paint

Self-undercoating gloss for Interior & Exterior woodwork, Int. floors & painted metal

Coverage: approx 12m2/litre per coat on non-porous surfaces. VOC content <0.1g/Litre

Prep - Remove any loose, dusty or flaking material. Use only high quality fillers – seal with this product diluted with 10% water. Substrate must be clean and dry (no dirt, oil, grease etc). Previously painted wood or metal surfaces need a light rub-down with sandpaper. Bare hardwoods need priming. Concrete must be dry & dust-free; dilute first coat with 15% water.

Paint - Drying time: approx one hour with light ventilation. Stir well to ensure the paint is completely mixed. Apply 2-3 coats with a short pile roller or fibrillated brush, leave 8 hours between coats. TIP: drying may take longer in very cold or humid conditions. If the colour change is very strong, more coats may be required. Outdoors & Floors need 3 coats. Do not lay-off. Cleaning – with a wet sponge, do not use harsh, abrasive, alkaline cleaners. Full cure & hardness is achieved in approx 10 days – avoid washing, wetting or abrasion for this time.

Clean-Up - wash equipment, brushes and rollers in water.

Storage - Store paint in dry conditions away from frost & heat.

Health & Safety - this product is considered to be non-toxic and safe – but do not swallow and keep out of the reach of children.


Satin Paint

Self-undercoating satin for Interior woodwork, floors & painted metal

Coverage: approx 12m2/litre per coat on non-porous surfaces. VOC content <0.1g/Litre

Prep - Remove any loose, dusty or flaking material. Use only high quality fillers – seal with this product diluted with 10% water. Substrate must be clean and dry (no dirt, oil, grease etc). Previously painted wood or metal surfaces need a light rub-down with sandpaper. Bare hardwoods need priming. Concrete must be dry & dust-free; dilute first coat with 15% water.

Paint - Drying time: approx one hour with light ventilation. Stir well to ensure the paint is completely mixed. Apply 2-3 coats with a short pile roller or fibrillated brush, leave 8 hours between coats. TIP: drying may take longer in very cold or humid conditions. If the colour change is very strong, more coats may be required. Floors need 3 coats. Do not lay-off.

Cleaning – with a wet sponge, do not use harsh, abrasive, alkaline cleaners. Full hardness is achieved in approx 10 days – avoid washing, wetting or abrasion for this time.

Clean-Up - wash equipment, brushes and rollers in water.

Storage - Store paint in dry conditions away from frost & heat.

Health & Safety - this product is considered to be non-toxic and safe – but do not swallow and keep out of the reach of children.


Masonry Paint Smooth

Masonry paint smooth & self-undercoating for exterior & interior walls

Coverage: approx 12m2/litre per coat on non-porous surfaces. VOC content <0.1g/Litre

Prep - Remove any loose, dusty or flaking material with a wire brush or scraper etc. Ensure the surface is clean and dry (no dirt, oil, grease etc). If new, bare or absorbent surface, (eg plaster or filler) seal with this product, thinned 10% with water. Repair damage using good quality filler – low cost fillers can cause flaking. Pour out as much paint as needed - do not put the brush or part-used paint back in the tin - it can cause spoilage.

Paint - Drying time: approx one hour with light ventilation. Stir well to ensure the paint is completely mixed. Apply 2-3 coats with a medium pile roller, leave 8 hours between coats. TIP: drying may take longer in very cold or humid conditions. If the colour change is very strong, more coats may be required. Do not lay-off. Full curing & hardness is achieved in approx 10 days – avoid abrasion for this time.

Clean-Up - wash equipment, brushes and rollers in water.

Storage - Store paint in dry conditions away from frost & heat.

Health & Safety - this product is considered to be non-toxic and safe – but do not swallow and keep out of the reach of children.